New trends in the electrochemical sensing of dopamine

Since the early 70s electrochemistry has been used as a powerful analytical technique for monitoring electroactive species in living organisms. In particular, after extremely rapid evolution of new micro and nanotechnology it has been established as an invaluable technique ranging from experiments in vivo to measurement of exocytosis during communication between cells under in vitro conditions. This review highlights recent advances in the development of electrochemical sensors for selective sensing of one of the most important neurotransmitters—dopamine. Dopamine is an electroactive catecholamine neurotransmitter, abundant in the mammalian central nervous system, affecting both cognitive and behavioral functions of living organisms. We have not attempted to cover a large time-span nor to be comprehensive in presenting the vast literature devoted to electrochemical dopamine sensing. Instead, we have focused on the last five years, describing recent progress as well as showing some problems and directions for future development.     

Sol-gel material as a support of organometallic catalyst for ethylene polymerization

The sol-gel procedure was applied to obtain powdery materials with different structures and morphology. It was possible to produce almost non-porous silica powder, with an extremely low surface area (ca. 4 m²/g) and very high uniformity of spherical particles as well as materials with various uniformity of particles and different porosity, most likely associated with increasing pore volume. Dependent on the properties of the carrier, the resulting supported vanadium catalysts (VOCl₃/AlEt₂Cl) showed significant differences concerning activity and stability. It was confirmed that improved hydrophobicity of the carrier’s surface may be useful and improve the activity of the system in the polymerization. It was found that the two-step modification procedure, involving a reaction with alkylaluminum, acts beneficially for the efficiency of supported catalysts. The system supported on sol-gel material with methyl groups, additionally pre-treated with diethylaluminum chloride, showed the highest activity as well as the lowest deactivation rate constant among all those studied.     

Solid-phase extraction procedure for determination of phenolic acids and some flavonols in honey

The solid-phase extraction procedure (SPE) for isolation and preconcentration of phenolic acids (gallic, p-HBA, p-coumaric, vanillic, caffeic and syringic acid) and some flavonols (rutin, quercetin and kaempferol) from honey samples prior to their determination by HPLC is reported. Different solid sorbents such as Bond Elut octadecyl C(18), Oasis HLB, Strata-X and Amberlite XAD-2 were tested for this purpose. The best results were obtain when aqueous solution of honey (100 mL) was adjusted to pH 2 and passed through the microcolumn containing 2.5 g of Oasis HB followed by washing the sorbent with 50 mL of acidified water (pH 2). The analytes were then eluted with methanol. The proposed method permits the quantification of the studied compounds with the limit of detections ranged from 25 ng kg(-1) to 0.75 microg kg(-1) for p-HBA and quercetin, respectively. The precision of the overall analytical procedure was estimated by measuring the within-day repeatability and the relative standard deviations of the parallel (n=3) results were in the range of 1.9-10.1%. The method was tested for real honey samples from different botanical origins.     

Spectroscopic investigations into degradation of polymer membranes for fuel cells applications

The research was focused on synthesis of proton conductive, easily degradable polymer membranes, which can be used as a model system to verify the efficiency of transition metal ions (TMI) in prevention of polymer degradation. Two polymers composed of 2-hydroxyethyl methacrylate (HEMA), 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS), and styrenesulfonic acid (SS) were synthesized. The copolymers were characterized by gel permeation chromatography (GPC), elementary analysis, and FTIR and fluorescence spectroscopies. The results allowed determination of weight-average molecular weight and the copolymer composition. The protons of sulfonic groups were substituted by paramagnetic transition metal ions of various spin states (Cr(3+), S=3/2 and Mn(2+), S=5/2) with the loading varying from 0.5 up to 10 mol%. The effectiveness of spin catalysis was checked by EPR. The results obtained indicate enhancement of polymer stability in the presence of Mn(2+).     

Photocytotoxicity of platinum(IV)-chloride surface modified TiO2 irradiated with visible light against murine macrophages

Phototoxicity of titanium dioxide modified with platinum(IV)-chloride complexes, [TiO2/PtCl4], irradiated with visible light was tested on murine macrophage cell line (RAW 264.7) in vitro. Presence of antioxidants such as alpha-tocopherol or beta-carotene during photodynamic treatment significantly increased cells viability. Our results indicate that observed cell death induced by [TiO2/PtCl4] was due to photogeneration of reactive species.     

Isolation of the minor and rare constituents from fruits of Peucedanum alsaticum L. using high-performance counter-current chromatography

A high-performance counter-current chromatography (HPCCC) method was applied for the first time for the preparative separation and purification of three rare compounds which occur as minor constituents in the fruits of Peucedanum alsaticum L.: 5-substituted coumarin notoptol and two dihydropyranochromones: divaricatol and ledebouriellol. A scale-up process from analytical to preparative in a very short time was developed. In order to purify a range of rare and minor compounds with different polarity two separate experiments were performed, one in reverse phase, the other in normal phase, using the same crude extract. A two-phase solvent system composed of n-hexane/ethyl acetate/methanol/water (1:1:1:1) was developed. The components purified and collected were analyzed by high-performance liquid chromatography. The method yielded 0.7 mg of notoptol, 1.46 mg of ledebouriellol at purity of 99.5%, and 10 mg of mixtures of divaricatol, alsaticol and alsaticocoumarin, where divaricatol present 22% by peak area. These amounts were obtained from 1 g of the crude extract in a single run. This is the first time when minor notoptol, ledebouriellol, and divaricatol were isolated in a single run using HPCCC method and first time when these were identified in plant from Peucedanum genus.     

Adsorption at the liquid/liquid interface in mixed systems with hydrophobic extractants and modifiers. 2. Dynamic interfacial tension at the hydrocarbon/water interface in binary mixed systems

The dynamic interfacial tension for binary mixtures of hydrophobic metal ion extractants and a modifier were measured by using the drop volume technique. Four types of equimolar mixtures were considered: two chelating extractants: 2-hydroxy-5-nonylacetophenone oxime (HNAF) and beta-diketone (1-phenyldecan-1,3-dion), two solvating extractants: trioctylphosphine oxide (TOPO) and tributyl phosphate (TBP), chelating and solvating extractants TOPO and beta-diketone, and the chelating extractant HNAF and the modifier (decanol). With the aid of the Ward and Torday equation the values of the diffusion coefficients of individual compounds and their equimolar mixtures were estimated. It was found that in the case of two types of investigated mixtures, i.e., HNAF + beta-diketone and HNAF + decanol the compound HNAF that was dominant in the mixed adsorbed monolayer and the more interfacially active also determined the kinetics of adsorption in mixed systems. In contrary to the mixture of two chelating reagents, in the case of a mixture of two solvating extractants the mixed system behaves like the less active, though dominant at the interface, reagent TBP. The same effect was observed in both of the considered diluents (toluene and octane).     

Studies of the hydrolytic stability of poly(urethane-urea) elastomers synthesized from oligocarbonate diols

Polyurethane and poly(urethane-urea) elastomers synthesized from oligocarbonate diols are characterized by very good mechanical properties, biocompatibility and excellent resistance to both oxidation and hydrolysis and therefore are widely used in medical applications. In this paper the results of studies on hydrolytic stability of poly(urethane-urea) elastomers (PURC) obtained by moisture-curing of corresponding urethane prepolymers synthesized from isophorone diisocyanate (IPDI) and four different oligocarbonate diols (OCD) are presented. OCD were synthesized from dimethyl carbonate and 1,6-hexanediol, from cyclic ethylene carbonate and 1,6-hexanediol as well as from trimethylene carbonate. The changes of the sample weight, mechanical properties and surface properties after immersion in a standard phosphate buffer solution (pH = 7.4) for up to 3 months at 70 °C were monitored. It was shown that neither sample weight nor mechanical properties changed significantly for PURC obtained from OCDs synthesized from 1,6-hexanediol and dimethyl carbonate or ethylene carbonate what confirms good resistance to hydrolysis of those PURC. Also SEM studies of those samples before and after immersion did not reveal any surface degradation effects. However, PURC sample obtained from OCD synthesized from trimethylene carbonate showed significant changes in mechanical properties and distinct change of appearance and surface erosion after 3 months immersion. The initial decrease and later increase of stress at break observed for PURC samples during immersion, was explained by the reaction of residual NCO groups present in PURC with water leading to molecular weight increase which proceeded during immersion period in parallel to hydrolysis of carbonate bond.     

Coordination properties of 1-allyl-2-methylimidazole relative to some metal ions in the solid state and aqueous solution

Cobalt(II) and copper(II) complexes with 1-allyl-2-methylimidazole (L), of general formula [ML₂(NO₃)₂], have been prepared in the solid state. The compounds were characterised by structural, spectroscopic and magnetic measurements. The metal ions in both six coordinate complexes are surrounded by two nitrogen atoms of the imidazole rings and four oxygen atoms of the chelating nitrato group (the CoN₂O₄ and CuN₂O₄ chromophores). The structure of both chromophores is described by a very distorted tetragonal bipyramid. The formation of successive complexes of the azole with Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ in aqueous solution was followed potentiometrically. An irregularity in the K_n constants of successive Co²⁺ and Zn²⁺ complexes suggests a change in the coordination sphere of the central ions from octahedral to tetrahedral. With the Co²⁺–1-allyl-2-methylimidazole system, the change has been proven by inspection of the visible absorption spectra.